How Do You Prepare Wood For Furniture?

How Do You Prepare Wood For Furniture?

You may be asking yourself how do you prepare wood for furniture? The process of drying and planning the final look of your new furniture can take a lot of time and effort. This is especially true if you are looking to have your furniture in the home for a long period of time. You don’t want to rush into this, you want to make sure you get it right the first time.

When preparing wood for furniture, there are a few things that you need to consider. You need to take a good look at the strength of the wood and see if it is going to stand up under the pressure of using your furniture. By strength, I mean the ability to hold a light weight item like a lamp. Also, check the quality of the wood that you have. If you can’t tell by the looks, find out how much decay has occurred.

Your next step is to treat the wood with stain or varnish. This will keep the wood from wearing away over time and provide protection from moisture and dampness. Wood treated with stain or varnish can be stained again in a year and the finish is durable and won’t wear off as quickly. Be careful to make sure that you use furniture polish or oil as it will help protect the wood from further deterioration.

Once you have prepared the wood, you will need to cut it to shape. You can either use a hand saw, or a table saw. Some people prefer to use a table saw and then finish off the edge with a belt sander, but this can cause scratches that will affect the finish over time.

Furniture may require some finishing after it has been carved and shaped. Depending on the style of the furniture you have bought, there may be an option to apply veneer, an artificial finish that resembles real wood grain. Depending on the finishes that you want, you can also select stain that suits this.

You should now be ready to start assembling your pieces. When choosing your pieces, always think about the type of furniture you will be putting together and how that piece will fit together. Many pieces will require the use of spacers, so be aware of what you have to use for them and how long it will take you to do it.

Don’t forget to check the level of your wood at all times and ensure that you put a good sealant down before you set the pieces in place. This way you will protect your furniture and also reduce the risk of chipping and warping.

Wood is quite expensive and you don’t want to damage it, so try to go for a finished product. It will give your furniture a better finish and will increase its lifespan. Remember to plan your project and to check the moisture content of your wood, so that you don’t end up with a dry piece of furniture.